1 / 3
Gridfinity standard bins with label and parameteric separators (fully parametric), a bit more Bug Free
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cleaned Akio's version, no magnets New Update!
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 132
- Wydruki
- 2
- Wyświetlenia
- 523
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (27)Powiązane
The proper description is the remix's differences, down below.
2025/01/12 UPDATES:
- UPDATE 1: I roughly corrected some bugs where Fusion didn't snap properly coincident point on projected geometry after changing height parameter
- UPDATE 2: I added parametric separators, “dividerCount” states how many compartments there are (1: standard bin with no separators; 2: bin with 2 compartments, so one separator; and so on…)
2025/07/13 UPDATE:
- I found out there's a site with parametric Gridfinity bins, it's based on OpenScad but the bin can be configured all via the browser; so now this model is outdated.
Since I made the separators fully parametric and it's not an attempt to correct some Fusion's bugs anymore I decided to add some 3mf files, I'll add more in the future, only with separators (without separators there are already Akio's ones).
Note: nC states the compartments number so, for example, 2C means 2 compartments.