Rope Clamp for Polyesterrope 6mm / Seilklemme für Polyesterseil 6mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for normal standard applications / für normale Standardanwendungen.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 305
- Wydruki
- 1
- Wyświetlenia
- 1915
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rope clamp allows eyes to be tied in a leash without splicing and without knots. Holding force for normal standard applications.
You need 4 press-in nuts M3 and 4 screws M3 x 10mm
I printed in PETG in 0.2
I wouldn't use PLA for that.
CAUTION! The rope clamp must not be used in safety-related applications, when climbing, as part of personal protective equipment (PPE), to secure people or heavy loads, or as a load-bearing element when suspending loads in areas where there are Stop people could be used.
Seilklemme ermöglicht es Augen ohne Spleiss und ohne Knoten in eine Leine zu machen. Haltekraft für normaler Standardanwendungen.
Du benötigst 4 Einpressmuttern M3 und m4 Schrauben M3 x 10mm
Gedruckt in PETG in 0,2
PLA würde ich nicht dazu benutzen.
ACHTUNG! Die Seilklemme darf nicht bei sicherheitsrelevanten Anwendungen, beim Bergsteigen, als Teil der persönlichen Schutzausrüstung (PSA), zur Sicherung von Personen oder von schweren Lasten, sowie als tragendes Element bei der Aufhängung von Lasten in Bereichen, in denen sich Personen aufhalten könnten verwendet werden.