1 / 2
Tronxy X5SA 330 Nozzle Wiper Mount for Bambu A1 Wiper — zdjęcie 1
1 / 2

Tronxy X5SA 330 Nozzle Wiper Mount for Bambu A1 Wiper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for Tronxy X5SA to add the Bambu A1 wiper to the bottom of the bed.

Ocena
0 / 5
Polubienia
2
Pobrania
20
Wydruki
0
Wyświetlenia
174
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

NOTE: This model is a piece of actual crap. I'd recommend you drop it into fusion, trace it out and make your own (I don't have any design files for it). If you are like me and are fine with absolute ghetto trash on your printer, please proceed.

Requires Bambu Lab A1 silicone wipers. Can be purchased cheap on AliExpress.

https://www.aliexpress.us/item/3256807216304441.html?spm=a2g0o.order_list.order_list_main.28.363e1802Mn815c&gatewayAdapt=glo2usa 

Uses two M3x8 screws. Can use longer if you'd like. Uses pre-drilled screw holes that are already there. Made for the Tronxy X5SA 330 (not the pro). It may fit other versions, if it does, please let me know.

 

Print Settings:

40% Infill

Gyroid

Arachne Walls

I'm currently using PLA, but ABS/ASA/PETG are all good candidates to mount this.

Tagi