X100V Peak Design Cube XS Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
X100V holder that fits inside Peak Design's Camera Cube XS
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 249
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Base that fits into the Peak Design Camera Cube X-Small with space at the sides for miscellaneous items/strap/extra lenses. Holder includes 3 SD card slots and 1 dedicated extra battery slot meant for the NP-W126S. Another battery can even be placed against the wall as seen in the picture allowing for a total of 2 batteries to be stored.
Designed for X100V fitted with adapter ring, lens and lens cap up to 23mm when assembled together. Any longer and the lens may collide with the wall of the cutouts. Most external edges filleted for better user experience.
Resize as needed according to the fit needed. Designed with a clearance of 0.15mm for battery and SD card slots. Printed in PLA but PETG/ASA would be the best.
Print settings:
0.40mm Nozzle
0.28 Extra Draft
100% Infill
4 bottom shell layers