Mean Well LRS-350 PSU Terminal (Contacts) guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The terminals on the Mean Well LRS-350 series PSU are not covered. This fixes that. It will not prevent short or…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 337
- Wydruki
- 5
- Wyświetlenia
- 1440
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The terminals on the Mean Well LRS-350 series PSU are not covered. This fixes that.
It will not prevent short or shocks when poking around with a screenshot driver or other conductive items, but at least you won't accidentally touch them.
I tried to be inclusive; there is a 240v, 230v, 110v, "Danger!" and a blank protector. (The last one in case you want something else written on it)
Insert the top site first, then click in the bottom side.
DISCLAIMER
I am not responsible for you getting shocked; always power off and disconnect the power lead before opening up the electronics case.
Just because I do not listen to my own advice does not mean that you should not either!
(Phil Collins said it; "Just do as I say, don't do as I do." and James Hetfield as well; "You can do it your own way, if it's done just how I say")
Consider yourself sufficiently warned ;)
important note;
This is the Mean Well version of the guard, not to be confused with the Landy version. This one will NOT fit the stock Ender 5 PSU.
For Ender 5 stock PSU, see https://www.thingiverse.com/thing:4761289
My Ender-5 build so far
https://www.thingiverse.com/make:890134
final note
If you like it, click the like (heart)
If you print it; post a make
If you have suggestions for improvements, questions, any kind of remarks; leave a comment
Looking at the download statistics, you guys and gals out there really like this thing :) so, leave a like, a make, a comment.
Much appreciated!
Category: 3D Printer Parts