EVA 3.0 E34M1 ProtoXtruder 2.0 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Sherpa mini mount did not fit (the foot for the NEMA14 blocked the mounting) so I designed a new one.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to nhchiu and jonspaceharper for the extruder and toolhead step files and their work!
I wanted to replace my Sherpa mini with the ProtoXtruder 2.0. The original drive mount for the Sherpa mini and the E34M1 didn't fit because the support for the NEMA14 motor was in the way.
I downloaded the needed step files and made a new drive mount (with and without motor support).
BOM:
2x Voron heatinserts (3x4x5 M3)
1x PTFE tube (According to the E34M1 docs the Sherpa Mini needed 45.8mm and my design is 5mm less in height. So it should be 40.8mm long. However my V6 TZ 2.0 hotend let the PTFE tube way more in so I needed a longer tube.)
1x zip tie (2mm or 2.5mm wide) for securing the motor