1 / 3
xTool P2S venthose 90 degree to 100mm hose adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A right angle adapter to fit a 100mm airhose on your xTool P2S.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 164
- Wydruki
- 1
- Wyświetlenia
- 797
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (46)Powiązane
This right angle adapter is designed to seamlessly fit a 100mm air hose onto your xTool P2S.
Perfect for tight spaces.
Print the adapter on the little box, for minimal supports and optimal direction of the layerlines.
Also you'll need an M5 heatset insert and screw, to tighten it to the laser.
(You could bodge and just use a longer M5 screw and a nut)