Creality3D Ender series high flow ring vent (Remix: 0.5 thru 2.5 mm lower)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On my Ender-5, this one works beautifully! Thank you Wacio! On my Ender-3, however, the vent touches the heater-block,…
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 478
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
On my Ender-5, this one works beautifully! Thank you Wacio!
On my Ender-3, however, the vent touches the heater-block, so I made 2 new versions, with respectively a 1 and a 2 mm higher top-part.
To know which one to print; this is an approximation!
- Lower nozzle to bed
- measure from bed to underside of part-fan (no shroud)
- subtract 13.46 mm (the total height of the original vent)
subtract 0.75 mm (the tolerance we want)
-> this will give a result, print the vent with the number closest to the result. Myself, I measured 15.7, giving me 1.49, so I printed and installed the 1.5 variant :)If you need higher, or a number in between; let me know.
edit: whoops, I accidentally marked the wrong original vent as remixed. This is obviously a remix from the part cooling vent by Wacio, #3345351
edit: added the actual numbers as indicated by TinkerCad.
Category: 3D Printer Parts