Pyramid Foraging Toy for Rats
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large pyramid shaped enrichment toy with 26 compartments for hiding treats
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 528
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Are you tired of foraging toys that don't have enough compartments? This one has too many!
This pyramid contains a total of 26 compartments for hiding treats. It has
+ 6 sliding drawers
+ 8 hinged door compartments
+ 8 corner compartments
+ 4 covered holes
Use with small dry treats or food only, like star Gerber Puff. Fill some or fill em all!
See it in action in the video below!
Printing Instructions
+ I printed using a .4mm nozzle on a Bambu labs A1 mini using Silk PLA
+ Use brims on the swivel pins to ensure they stay upright
Print the following parts and quantities
Qty ; Part Name
1 pyramid
6 drawers
8 hinged doors
4 corner covers
4 corner covers, mirrored
4 swivel plate
5 swivel pins
Gather the following non printable parts
16 inches of 1/4" elastic cord ( or similar ) cut into 4 inch segments
Optional : One wooden base - a piece of wood with a footprint at least 175 x 175mm x 25mm
Optional : One small wood screw about an inch long with a head ≤ 8mm, eg: a #8 wood screw
Assembly steps
See the assembly video for detailed instructions!
Assembly Notes :
+ Drawers snap fit
+ Hinged doors snap fit
+ Swivel pins snap fit - make sure to put the pin through the swivel lid first
+ Thread elastic cord through the corner cover doors and knot it on both ends
Optional :
Use a wood screw to fasten it to a wooden base
Constructive feedback is welcome. Have fun and happy printing!