1 / 3
Lego Endurance scaled minifigures crew and dogs — zdjęcie 1
1 / 3

Lego Endurance scaled minifigures crew and dogs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Lego Endurance model reduced scale minifigures for crew and dogs

Ocena
0 / 5
Polubienia
10
Pobrania
64
Wydruki
1
Wyświetlenia
1331
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Lego Endurance model is a delight to build but is unfortunately out of scale from the standard minifigures, they need to be reduced to about 63 percent from the standard Lego minifigs.  A simple reduction would, of course, prevent them from mounting on the standard studs.  So, while doing that I decided to go ahead and make individual minifigs for the crew with different hats and props.  Of course Shackleton is in a fedora and Worsley has a captain's hat with sextant but you know, feel free to make it your own, paint them, do what you need.  Hussey, as the smallest crew member, was also made smaller in order to easily fit into the crow's nest.  There were 28 crew members so print out what you need for what you feel is right, I found 14 gave the deck enough life that I could stop there and be content.

The dogs (there were 69) are a difficulty to print on the 0.4 nozzle I have, those with a 0.2 may have an easier time of it.  I am including two standing dogs but was never able to make their spindly little legs survive the removal of the supports.  These don't have stud holes on the bottom as it would have been impossible to fit the negative space in.

Again, the scale is about 63 percent smaller, feel free to come up with your own remixes or add a pipe to old Tom Crean, that and moustaches were details that are just lost at this scale.

Tagi