Holders for Cecotec Expresso Portafilter and filters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holders for your Cecotec Expresso portafilter (group handle) and filters so that they can dry and not be lost.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a new spot for my portafilter and filters so that I would not loose them in the kitchen mess. Also a place and position where they would dry. Normally I used the top of the coffee machine but then I needed to place a laptop on there.
So I designed these holders that can be double-taped to the side of the coffee machine, in this case a Cecotec Expresso 790 (but Cecotec seems to reuse a lot their handle design, so it should fit a lot of models).
Print vertically (with large brims) to avoid natural weakness of 3D printed layers.
Mine was printed in PLA in 1h each holder.
