1 / 1
Stanley Utility Knife Blade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a standard Stanley utility knife blade. It converts any box cutter into a less dangerous fidget toy!
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 263
- Wydruki
- 3
- Wyświetlenia
- 1955
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 7)Remiksy (0)Kolekcje (52)Powiązane
This is a model of a standard Stanley utility knife blade. I wanted to make the most of my Pichi G9 knife that I got on Kickstarter by turning it into a less dangerous fidget toy.
There are two basic variations:
- Uncompensated or compensated: The uncompensated model is true to the blade specifications, while the compensated one has slightly larger alignment notches to allow for some expansion while printing.
- Pointed or rounded edges: The pointed edges are true to the specification, while the rounded ones are a bit safer.
Printing instructions
- Choose the version you want.
- Print the .stl file as oriented (the blade is largest on the print bed).
- I recommend 0.1mm layer height with ironing.
Assembly
- Gently press the joint through both blades until it is fully inserted.
Safety notes
- This is not a toy.
- It is less dangerous than a real blade.
- Please supervise your children at all times.
- Best not to bring this on an airplane.
Notes
- I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification (i.e., notch diameter, blade angle, rounding radius, etc.), send me a message and I'll see what I can do.