nerf Hammershot extended draw with stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a remix of grubby raccoon 8 degree extended draw and horsengineer draw for the stock stopper
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 586
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of grubby raccoon 8 degree extended draw and horsengineer draw for the stock stopper.
I had to extend the latch on GrubbyRaccoon's design by 1mm to make it work in the stock blaster. I did a dirty cut and merge of Horseegineer's design to add the stopper that hits the rubber pad. I had to take out the AR in mine to clean it and I needed the stopper to prolong the life of the blaster. Otherwise, it would slam the end of the plunger tube every time. I had to do some minor trimming on the top to allow the hammer to move all the way forward.