Gridfinity Carousel Motorized USB-C power panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Merging of my USB-C panel mount with the power plate
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tray and port that house a USB-C decoy board. When used with a real USB-C power supply, will supply 12v to your project with a 12v board. Boards come in 9v, 12v, 18v and 20v so pick wisely.
After fitting the decoy, melt the back of the tray into the board to retain it.
This tray fits these decoys I purchased from Amazon: https://www.amazon.com/dp/B09GVQ3FGW
Note: These require some reworking to make 12v. Read the reviews!
Print with the face of the panel down and grid supports under the screw holes. No supports required for the hole on the back. Printed at 0.3mm in PLA without issue.