1 / 3
Roof Rack Fishing Rod Holder - Spin and Baitcaster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the rack made by GCarr.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 141
- Wydruki
- 2
- Wyświetlenia
- 1541
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (42)Powiązane
Print 2 of the rod holders and mount facing each other - I used PETG 30% infill.
It still uses 4 mm bungee to hold the rod handles in and i have added to holes to allow a zip tip for longer trips. I used Velcro straps to hold the tips in place, its is plenty strong enough.
It also still uses 6mm Nut and Bolt.
I have also printed a reducer that slides into the rod mount to more securely hold smaller diameter rods.
Enjoy and catch plenty!
