Bosch 18V Tool Holder - With names and Thicker for Belt Hooked Tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to provide a thicker base to allow tools with a belt hook attached to be stored under bench or shelf.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tool holders for Bosh Professional 18V tools (particularly those with pistol-style handles) to hang under a bench or shelf. These prints have a simple colour change at the appropriate layer: I printed both .20mm and .24mm layers without problems, with text on top (obviously).
The thick version is sufficient to hold a drill (or whatever tool) with the standard belt hook attached. The thin version is a little thicker than the original to allow space for the labels. Unlabeled versions are included, you can add whatever label you like using Tinkered (a 1mm exposed text is sufficient).
Printed at 0.24mm in ABS with three walls and 20% gyroid infill on BambuLabs X1C in Sport mode for the ones shown here. I used 40mm 8 gauge screws to fit the thick version; 20 mm screws were sufficient for the thin ones. I am contemplating a French cleat version for some other tools (multitool, plane and jigsaw) to go on the tool wall behind my bench - not sure about the cantilevered weight that might develop.