1 / 13
The Owl House Tower — zdjęcie 1
1 / 13

The Owl House Tower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

11,02 € – 13,47 € netto (bez VAT)

Dla pliku: toh_house-tower 4 5_0.2mm_PLA_MK3S_13h39m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 12,25 € netto (środek widełek).

Masa podana przez autora
124 g
Czas druku podany przez autora
13,65 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Model of the tower behind the Owl House with interior from the show of the same name.

Ocena
0 / 5
Polubienia
6
Pobrania
25
Wydruki
0
Wyświetlenia
145
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a model of the interior and exterior of the tower behind the Owl House.

There's also a version of this tower as a dice tower (toh_house-dice tower.stl)

 

Here's a list of all parts of the Owl House:

DimensionsLengthWidthHeight
entire house179mm176mm166mm
ground floor179mm172mm75mm
middle floor107mm154mm48mm
top floor103mm91mm80mm
tower (this)103mm107mm282mm

The tower has 3 floors, not counting the roof.

I have taken some creative liberties with this model. I've added a door and a staircase. The show (seemingly) only shows one floor of the iterior, which I've split across two floor for this model to make room for the staircase. I've also designed a new room for the lowermost floor.

Print Instructions

Printed at 0.2mm layer height.

I've used adaptive layer height for toh_house-tower 1.

 

 

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#

 

[UPDATE 2025-01-14] added dice tower

Tagi