Bosch PBD 40 feed lever center hub (metal print design)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy adapter to be printed in metal
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Having used following feed lever for over a year and being very pleased with it, I wanted to have a stiffer version. It works nicely but I ended up often retightening the screw in an effort to prevent some slippage when higher forces are applied.
https://www.printables.com/model/128368-feed-lever-for-bosch-pbd-40-hebelkreuz
So I made this adapter which is printed in metal. It ain't cheap but I wanted to try it. Printed in stainless steel, I paid 40$ plus shipping. Accuracy seems to be within +/- 0.15mm. Since I have access to a lathe, I set the diameter for the axle to 19.00mm. I later had to remove 0.25mm for a nice fit. Therefore I set the diameter to 19.25mm in the uploaded version.
You may change that or any other feature, I provide the fusion360 and step file.
You have to tap three M6 threads for the arms and one M8 thread for the set screw. I did not dare to print the threads. Use the original M8 set screw that came with the wheel. Also the original black plastic spacer is reused.
The part makes a very solid impression, it probably outlasts any other part on this small drill press.
Assembly is easy, just only screw in the M6 threaded rods once the center hub is in place on the machine. The threaded rods collide with the axle otherwise when inserted to far.