ESP32Cam MK4 Home Assistant Integration and ESPHome
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
X-Axis support arm for ESP32-CAM devkit
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The aim of this project is to visually and remotely monitor the printing progression, prevent failed prints, and, if necessary, launch a cancel command to stop any potential damage.
I remotely control my MK4 Prusa via the PrusaLink Integration and Home Assistant : https://www.home-assistant.io/integrations/prusalink
In order to have a better static view of what is going on, I pause the job for a while, and the extruder moves to the opposite corner, allowing me to see a perfect landscape. After that, I resume the job.
You can draw inspiration from this very nice project to integrate an ESP32-CAM with Home Assistant and ESPHome : https://haade.fr/en/blog/esp32cam-ai-thinker-homeassistant-esphome-full-configuration
I only adjusted the configuration to enable the modification of the flashlight's dimmer.
Materials :
- ESP32-Cam
- USB-C power supply (USB to TTL module 5V/3.3V)
- 2 Dupont wire
- Printed with PETG Jet Black Prusament