1 / 3
Remixed MMU3 idler body - secure metal pin from falling out
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a reworked MMU3 idler body with a grub thread insert to prevent the outer metal pin from leaving the idler body.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
Print material : PETG recommended.
Use organic support on build plate only, 40% grid infill recommended.
Prints fine with 0.20 STRUCTURAL profile with 0.4mm and 0.6mm nozzle.
In order to secure the metal pin when finishing building the idler body, insert a M2 grub screw (2mm screw length recommended). For the M3 model, same screw length recommended.