Magnetic Socket Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnet Socket Rails that will hold 1/4, 3/8 or 1/2 drive sockets and other tools. Easily remove and add sockets
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got tired of my Gridfinity bins and I needed something that I could easily take and place sockets without messing up other ones or losing space. These rails use 10mmx60mm magnets from Amazon and I just glue them in place. I have not had an issue with the magnets coming free or the rail moving while trying to pull a socket out. The models are labeled by “Shallow” and “Deep” meaning the base of the rail is either wider or narrower. The wider rails work well for ½ drive sockets. The numbers indicate the number of magnets needed to fill the rail. The model has spots for small circular magnets at the bottom for even better security, but they are not needed. Always open to suggestions on how to improve this so remixes are welcome.
Magnets- https://www.amazon.com/gp/product/B081W5P4GD/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Circular Magnets- https://www.amazon.com/gp/product/B081W5P4GD/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1