Bissel Little Green Handle Hose Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement hose connector for the Bissell Little Green Pro / Heat / Extractor
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The original hose connector uses epoxy to hold the hose in place, so when the hose tears the entire thing is designed to be replaced. Our hose tore right next to the handle, so I didn't want to waste it the whole hose. Instead I cut the hose at the end then designed this new piece.
I designed this with a threaded section that accepts the hose. The thread has a 4deg taper inside so it tightens itself as you thread it in, which helps prevent the hose from loosening and also aids in sealing for better vacuum suction.
Also includes o-ring feature on the top, reuses the original o-ring.
Can be printed right side up with no supports.