MK4S/MK3.9S Filament Guide with Bowden Adapter for 6 mm PTFE tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrades the Filament Guide of the MK4S/MK3.9S with a Bowden Adapter that accepts a 6 mm OD PTFE tube for dry boxes
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 752
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I needed a way to make my MK4S utilize the 6 mm OD PTFE tube that comes with the Polymaker Filament Storage Box.
I didn't want shell out extra money for hardware so I took some inspiration from sgmeesix's MK4 Filament Guide with Bowden adapter and applied the same design to the MK4S/MK3.9S Filament Guide with some improvements for a 6 mm OD PTFE tube.
I only tested this with the MK4S. It should work with the MK3.9S in theory.
- Print settings: 0.20 mm Structural
- Filament: PETG (PLA works fine in a pinch)
- Supports: Support on build plate only
- Infill: 15%
Autodesk Fusion f3d file is included in the Downloads section if you want to customize :)