1 / 6
Legion Go Dock with dual 80mm Fan Support — zdjęcie 1
1 / 6

Legion Go Dock with dual 80mm Fan Support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A dock for the Legion go with mounting points for a dual 80mm fan.

Ocena
0 / 5
Polubienia
16
Pobrania
78
Wydruki
0
Wyświetlenia
1362
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted a dock to be able to just set my Legion Go into an utilize the bottom port, also making it easy to grab and go. I liked the idea of adding a little extra cooling since I like to have the Go set to the highest performance while it is plugged in. I also have an external drive set up to the dock to store some larger titles that tend to warm the system up a bit. The fans help keep things a bit cooler and should hopefully extend the life of everything. 

I started with Ememell's stand. It was a great basic design, satisfying my original intend of using the bottom port. For the fan supports, I wanted to get just the right contours, so I used yor42's awesome case design and cut out the pieces I needed. 

I used a ELUTENG Dual Cooling Fan Whisper Quiet 80mm USB Fan that I ordered from Amazon for about $10. It is nice and quite and has adjustable speed. I use a laptop docking station with passthrough charging and added a 90 degree angled USB C adapter. 

Currently, I just have the USB C plug floating in the slot. It stays in place well enough that it is easy to set the Go onto it and snaps in nicely. When I pull it out, it catches on the stand well enough that everything comes apart nicely. I have though about filling it in with air drying clay with everything docked so that it all stays the in perfect position, but it works well enough like this that I may not worry about that.

Also shown in these pictures are @Brian_328777's Legion Go endplates as well as @gigax2_37706's awesome controller adapter.