1 / 5
Parts Holder for Massca Pro Pocket Hole Jig M2 — zdjęcie 1
1 / 5

Parts Holder for Massca Pro Pocket Hole Jig M2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted a space efficient storage solution for my M2 pocket hole jig with the bars removed. Here it is!

Ocena
5 / 5
Polubienia
9
Pobrania
53
Wydruki
3
Wyświetlenia
296
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

This model holds everything that comes with the “Massca Pro Aluminum Pocket Hole Jig System M2" product.  The design intent was to hold all parts and lock in the holder with the jig's clamping force set to a ¾" (19mm) thick board.  Once the parts are loaded into the holder and stacked on the jig, just clamp it!  All parts are securely stored.  

When I printed it, I used supports on the underside area that provides space for the depth gauge.  

In case it's not clear how to stack the holder, I took a series of pictures showing the parts storage and stacking the two parts.  

Print Settings I used:

0.2mm layer height, 15% infill, 4 wall loops, 5 top/bottom layers, tree supports.  

Tagi