Philips Norelco One Blade – Charging with USB-C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottom frame part replacement with an USB-C type opening.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Requires soldering a USB-C PD (I used this one at 5V) directly to the battery terminals.
The base part will provide additional support. No glue is required.
Disassembly starts with crude destruction of the proprietary charging port. Then, after some downward pulling, the original bottom part will come out, housing the battery and motor assembly. (You might be able to just pull it, without demolishing the port)
Make sure to solder USB-C in correct orientation to fit the printed part.
Reuse the black gasket from the original for a tighter fit.
(Water resistance of the device is obviously suffers from the lack of protection at the bottom USB port opening)