1 / 6
Turbo Whistle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You may need to work the turbine in by hand if your printer isnt precise enough. It perfectly worked for me though.
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 709
- Wydruki
- 4
- Wyświetlenia
- 2556
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (43)Powiązane
I made this small Turbo whistle.
You may need to work the turbine in by hand if your printer isnt precise enough. It perfectly worked for me though. I tested it both with PLA and PETG from sunlu and it workes like it should.
Layer height: 0.16mm
Supports: No
Infill: Doesnt matter(i used 15%)
Wall loops: 3
Nozzle: 0.4mm