iPad mini wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for an iPad mini designed for portrait display. I made this to mount as a control pad in our RV because the…
- Ocena
- 4 / 5
- Polubienia
- 19
- Pobrania
- 188
- Wydruki
- 1
- Wyświetlenia
- 2165
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall mount for an iPad mini designed for portrait display. I made this to mount as a control pad in our RV because the default touchscreen is awful.
The mount allows you to slide the iPad in and out from the top, and hides a standard charging cable. I included a hidden area to loop extra cord as well. Additionally, I added a cutout on the bottom in case you just want to run the cord straight out. I made this about 2mm larger than the iPad in the horizontal/vertical dimension so that it would slide in easily and accommodate a slim case if needed. There are 4 screw holes to mount it. Print face down and no supports are needed. I made this in PETG with 10% infill, but it should be fine in PLA as well.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
200
Infill:
10% honeycomb
Category: Tablet