Backshell for DEUTSCH DT plug with 12 contacts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
90 degree backshell for DEUTSCH DT06-12SA-P012 used on for example agricultural GPS receivers.An adapter for a M16…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
90 degree backshell for DEUTSCH DT06-12SA-P012 used on for example agricultural GPS receivers. An adapter for a M16 with 16mm outer diameter corrugated pipe is included in the back of the shell. Also included is a clip on dustcover for storing the dust cap of the recepical.
I designed the two halfes to be clipped together with the seperate clips found in the folder, but my Kobra did not manage to print them as i designed, so I taped the bottom part with some Gaffer Tape
Category: 3D Printing