pump filter / pump guard for the Miaustore cat fountain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pump filter / pump guard for the Miaustore ceramic cat fountain
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- GNU General Public License v3.0
IMPORTANT: When printing this model, please make sure there are no bits that could get loose and ingested by your cat (for example, when bridges leave loose strands of filament). Clean and inspect your printed model properly before using it.
The original part was also 3D printed, but unfortunately Miaustore wouldn't share the STL for “quality reasons”, so I decided to make my own and share it here.
Changes I made while I was at it are the way it's mounted, a better fit overall, stronger connections, and bigger grooves to insert or remove the metal mesh into / from the filter housing more easily.
Note: If you don't have the metal mesh anymore, just create a new one by cutting it to the size of 46mm x 27mm.
This model is made for the pump model AD101-0505A, this is the only model I am able to test. Let me know in the comments if you have a different pump model that's also compatible and I'll update the description. (The alternative model has also been confirmed to work with the pump model AD106A-0505B)
I also have an alternative model included which uses a clip-on design; this uses slightly more filament to print, but should™ be compatible with all pump models. If you find the “main” model too hard or difficult to install, give this one a try.
I recommend printing the model upside-down and manually paint the supports (using the “fill” tool) along the top combined with the support settings as shown in the screenshots (dark blue area = painted area, teal area = bottom on build plate). 2 Wall loops results in a strong model.