1 / 1
Cutout Templates
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cutouts
for signs, medals, ...
Handling
Simply insert in the slicer as a negative volume. Then place and scale as desired.
For maximum contrast, a color change can be inserted after the cutout. The cutout is 1mm high, but can be adjusted to any height by scaling in the Z axis.
see also Cutout_sample.3mf
Normal and inverse cutouts
Each cutout is available as a 'Normal' and 'Inverse' cutout (_inv.stp). The use depends on the color arrangement.
| light color at the front dark color at the back | please use the 'Normal' cutout |
| dark color at the front light color at the back | please use the 'Inverse' cutout (_inv.stp) |
| if the color is unclear background lighting, etc. | please print out a scaled test and determine each one. |
current overview
Other dog breeds will be added gradually.
If you would like a specific dog breed, please let us know.
Please note!
- The geometry of the cutouts is not connected. It can be used as a negative volume or backed up with additional geometry.
- The circumference diameter is approx. 100mm. This can deviate by up to 5mm. Please allow for a reserve or scale accordingly.
samples see also here:
- signs
- werewolf-wall-art
(adapted step file)
Have fun using it creatively. I would be happy to receive a make.