Gridfinity Drill/assecoires stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drill stand for gridfinity base ( 2x2 )
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Looking for a drill stand which will hold all of my drills, bits, polish tools with a Gridfinity base.
And one which has a inner shaft up to 4 mm wide to fit my Dremel tools.
So I tried to design my own because haven't found what I was looking for.
Like I said in my previous published model. I have basic skills on Tinkercad so there could be a few mistakes in the drawings although not visible within the finished print.
Made the base with the Gridfinity Generator and did the rest of the design in Tinkercad
The model is 2x2 and 0,5U tall measured without the base and can hold a total of 64 drills/bits/ …