gridfinity torx and allen bit holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a 1x2 gridfinity bin for torx, allen bits and a 3/8" socket adapter
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Gridfinity bin for torx, allen bits and a 3/8" socket adapter
The bit holder uses a gridfinity 1x2 bin.
Holds nine larger 5/16" / ~8mm hex bits and one 3/8" socket to 5/16" (~8mm) adapter:
T-55H, T50-H and T45-H (Torx - Tamperproof)
10mm, 8mm and 6mm
3/8", 5/16" and 1/4"
That's what my kit came with, the bin holds any 9 bits.
Print standing with 15% grid/gyroid infill and no support.
You can hang it on a peg board or wall with this modula gridfinity 2x2 holder.
I've made other gridfinity bins for tools.
MODULA - a module based tool holder system
The idea is a adapter plate (metric/imperial/plain) that attaches to peg board/wall, then a module snaps on to this adapter with dovetails.
Why use an adapter? Everyone can share the modules worldwide, and just adjust the adapter plate for their environment.
This module attaches to the adapater biltema or the vanilla adapter available here on Printables. The vanilla adapter can be modified so it fits wherever You need to hang these modules.
