Low D Tin Whistle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is my take on a Low D whistle since there are not many files of these around. Sounds good and in tune some what.
- Ocena
- 4,75 / 5
- Polubienia
- 28
- Pobrania
- 361
- Wydruki
- 3
- Wyświetlenia
- 1307
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
My low D whistle is similar to the one made by Vincent Cyr. The main change is the mouthpiece, it is a much more friendly to play in my perspective (though it may vary from person to person). I used the same website used from the original model here(https://www.guidogonzato.it/whistle/). I may make a tunable version of this whistle down the line. This model is cut into 3 parts so that it can fit on an original Ender 3.
UPDATE 10/17/25:
Added Low E♭ whistle
UPDATE 06/13/25:
Added Low C whistle. This one is very tall and may max out a stock ENDER 3
UPDATE 02/14/25:
Tried to resolve the “breathy” second octave and added a label for the key on the bottom piece. Also to make it tunable, glue the BTM and MID pieces together but leave the TOP piece unglued. Use PTFE tape on the joint between the MID and Top pieces and adjust it so that the low D is in tune.