1 / 5
PTFEntrance - Filament to PTFE entrance guide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Funnel to make guiding filament into the PTFE tube easy. No supports.
- Ocena
- 4,75 / 5
- Polubienia
- 167
- Pobrania
- 250
- Wydruki
- 4
- Wyświetlenia
- 2839
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 4) (Komentarze: 9)Remiksy (1)Kolekcje (251)Powiązane
Funnel to help you guide filament into PTFE tube. Holds the PTFE tube firmly in place.
How to use
- Utilizes Festo M5-4 fitting (MMU3 spare part) to firmly hold the tube in place
- To be fixed with thick doublesided tape
- Designed to be used with MMU3 unit
- For the best experience, use with my Hanging filament spool holder
How to print
- Print using PETG or other durable material
- Print with MMU to make the center more visible for easy navigation
- No supports needed, print with the front face on the print bed
- MMU ready to print file atteched, with 1-5 marks for easy use with MMU3
- Set layer height to 0.15mm for best result