1 / 1
Adapter to use Automaxx Bench Clamp on Felder Sliding Table Saw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Kreg KBC6 Automaxx Bench Clamp, 6 Inch for the Felder sliding table saw T-slot.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
I wanted clamps for a Felder K500. I got the Felder manual ones but they were cumbersome and slow to set and release. I ended up using Kreg KBC6 Automaxx Bench Clamp, 6 Inch with this model to adapt it to the felder T-Slots.
I've had trouble with the base breaking so I ended up printing it with PAHT-CF and 100% infill. That's been good so far.
I use ¼ bolts for the t-slot clamp. The Kreg came with a bolt in the base which I designed around.