Sinclair Microdrive Cartridge Replacement Case (0.2mm nozzle recommended)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement case for a Sinclair Microdrive Cartridge.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement case for a Sinclair Microdrive Cartridge.
Printed in two halves which need to be glued together. I went with this option to make it easier to add logo's (see Sabreman example photo) and this also removes the need for any supports. I added a very fine lip so the two halves fit neatly together. To secure just add a tiny but of super glue to the inside lip on the bottom part and hold together.
The case includes the securing nubs from the original and the bottom bumps, I've included a photo of the printed version underneath an original to show the nubs. The case does differ slightly to the original as that got slightly thiner towards the bottom which wouldn't print very well, but the case is the same dimensions apart from that.
I recommend this is printed with a 0.2mm nozzle.