Mini Figure Motorcycle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Motorcycle is design to go with Mobile Mini Figure v2.0 by azraelho published on Thingiverse on May 29, 2014. It…
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 222
- Wydruki
- 0
- Wyświetlenia
- 1416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Motorcycle is design to go with Mobile Mini Figure v2.0 by azraelho published on Thingiverse on May 29, 2014.
It prints best on very high resolution at slower speed in PLA. The frame has designed in break away support structure so no need to add support structure for any of the parts when you slice them.
This is still a work in progress but you can see that I have printed and assembled it while tweaking the models.
YES. The Wheels Turn.
Fun pandemic weekend project.
Motorcycle is approx. 1" x 2" x 3/4" once assembled.
3/29/20
I've updated pretty much all of the models to tweak various items. Handle bars in better position for the figure to grab with upward pointing posts angled forward and inward for the figure to grasp. Reduced cylinders for foot pegs to accept the figure legs. Improved seat design. Clearance between rear fender and rear wheel improved. Thicker Axles, thicker clips, enlarged holes in suspension for larger axles. Thicker clips. Etc.
I've been printing with a .2 mm 1st layer height, .12 Layer Height, 50 m per second, 100% infill for the Motorcycle halves, figures. Handle bars etc. the Wheels I printed at a .2 layer height throughout.
Don't forget to use Soap to aid assy. where parts may be tight and Kragle (Krazy Glue) to secure items - use safely following manufacturer direcitons.
Print Settings
Printer:
BIBO
Rafts:
No
Yes
Resolution:
150 um
100
Filament: Inland PLA Doesn't Matter
Notes:
Main body of Motorcycle has designed in supports already in model that need to be cut away. Model may require some small amount of filing. Glue together with Kragle. Follow glue handling directions.
Small parts - keep away from small children.Post-Printing
Trim and file as needed.
1.) Loose fit two sides of motorcycle body and handle bars together. Once aligns well Glue the 3 pieces together.
2.) Assemble Axles and wheels to body then place one clip on each axle end. Use a very small amount of glue on clip at axle interface. Obviously, don't let glue run down Axle to wheel.
3.) Glue Seat in place over "T" on body of motorcycle in seat area.
4.) Add Mini-Figure if desired and enjoy.
Hint: A dry bar of soap makes a great lubricant to help assemble 3D Prints or for moving parts.
How I Designed This
Designed in TinkerCAD.
Category: Toys & Games