BIBO Printer Catch to Hold Door in Open Position
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base Prints Upside Down. Support structures are designed in place with thin attaching sections for easy removal.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Base Prints Upside Down. Support structures are designed in place with thin attaching sections for easy removal.
Post-Printing
Remove support structures designed to print in place and with very thin connections to main model for easy removal. Model prints upside down. Trim or file as appropriate.
How I Designed This
Designed in TinkerCAD.
Custom Section
I'm sure the design could be improved but it's pretty simple and works. I had been using magnets on two sided tape to hold the door up but eventually the tape gave out. I don't know why they didn't desin in a catch. I used a strap of tape for a long time but eventually the tape would always tear or lose it's stick and the door (though very light) would inevitably come crashing down scaring the daylights out of me.
Category: 3D Printers