Rat Roller V2 - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cage-mounted food dispenser releases treats when rats rotate the roller. It is designed to be mounted in the cage.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 366
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Motivation - Refill Video
My main motivation for this remixing the rat roller model is to make it really easy to refill. Here is a quick video of this remix being refilled!
Performance - In Action Video
The toy still performs well. Here is a video of it in action.
Parts - Nonprintable & Printable
Nonprintable Parts
Additional Parts Required!
> One M5 hex head bolt, 35 to 50mm in length.
> One M5 hexagonal nut
Printable Parts
Print one of each printable part. I printed my parts in PLA on an A1 Mini with a .4mm nozzle with default settings for all parts and no supports. I used a generic basic PLA, but the roller assembly looks really cool in Silk PLA!
Parts - Assembly GIF
Here is a GIF that demonstrates how all the parts fit together
Assembly - Instructions & Visual Video
Pre-assembly : After printing, all threaded parts must be screwed together and taken apart a few times to break in the threads and remove any errant printed material. After removing any brim material and breaking in the threads proceed to assemble.
In lieu of step by step directions, I've included an assembly video below. The gist of it is screw parts together! Also, it takes some force to get the printed lock-nut-and-washer part screwed into place, so break in that thread!
Per the usual, good luck and happy printing!