DnD dice box with dice tower, mini storage, roll-area, HP-wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on a dice box
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
Hi everyone,
I tried so many existing dice boxes. All of them had pros and cons. Since i definately wanted a spinning HP wheel I finally designed a box of my own.
It contains:
Dice storage in the tower
Dice tower
Mini storage
Movable lid-inlay to attach a sheet of paper (i.e. for stats)
Spinable HP wheels
The closure for the dice tower keeps it standing up when opened.
The Lid/dice tower are two separate prints, the hinge works with a piece of wire.
The movable lid inlay is pinted in place, a little wiggle should break it loose, then there is plenty of room to slide it in and out. I attached a flatter paper clip to hold a small stat-paper (12 x 5,5 cm)
I printed in PLA (3 walls, 15% infill) - except the HP-springs (printed on Anycubic S1C)
The lid should be printed upwards.
The springs for the HP-wheels are printed in PETG so they dont snap when pushed down.
Some of the files need to be separated in the slicer to print in the colors and orientation you want