Enfit feedingtube connector key/wrench two sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This wrench is to loosen stuck feeding tubes with Enfit. This model helps you loosen the connection easily and painless.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 646
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I use a feeding tube and the Enfit connector gets stuck very often. Even my husband can not always get it to seperate. This causes stress and is a hassle. Even when the Enfit connector isn't very tight or stuck it causes stress on my hands and hurts the joints just because of the repetitive motion. This wrench makes it very easy to loosen the connection. Even better when I use two! This enfit wrench can fit on both sides of the feeding tube connection. The nuticia/flocare pump set and the feeding tube itself or the button set for some tubes. Not all PEG or PEJ tubes have a round bit with this same kind of plate at the two opposide sides. Mine does and this makes it possible to use two wrenches. If you do not have this type of part at the belly side of your tube you can still use the enfit wrench at the feeding set side and this will still help tremendously with getting it loose.
The file contains two sizes. The short one is perfect to fit in your bag and troww around the house so you always have one nearby. The larger one is made to fit your whole hand and makes turning the key even easier because you have more surface area to push on.