Nikon F Lens cap tight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One more Lens cap for Nikon F. This one is getting tighter when screwing on a lens or an Nikon F adapter for astronomy.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- GNU General Public License v3.0
Why another Lens cap?
The usage of an original Nikon cap on my adapter 2" to Nikon-F for astrophotography was quite loose and often dropped down while transporting/handling the telescope. Therefore I decided to design one on my own. After some mm the thickness are increasing for getting a tighter fit → not loosing the cap anymore.
The cap is also fitting on lenses, but there I had no problems with loosing the caps.
There is one versions with ribs on the outside and one smooth. The ribs improve the grip when you want to tighten more firmly
Printing
Printed with PETG on Bambulabs X1 Carbon with 0.4 mm nozzle and variable layer height. Depending on the number of bottom shell layers no support is needed, no brim.
Top side on printbed (see picture).
Color
Printable with one or dual color.
Dual Color:
It is possible to paint the surface of the "F". The small groove around it is 0.42 mm deep which is around two layers. Depending on the used slicer maybe also the (very small) side-surfaces on the “F” should be painted.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work