1 / 2
Small Dog Bowl - Slow Feeder Insert -100mm Dia. x 24mm High — zdjęcie 1
1 / 2

Small Dog Bowl - Slow Feeder Insert -100mm Dia. x 24mm High

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small Dog Bowl insert to slow down how fast they can eat. 10/25/21: I added a Version 4 with a cleaner model than the…

Ocena
4,5 / 5
Polubienia
8
Pobrania
82
Wydruki
2
Wyświetlenia
998
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Small Dog Bowl insert to slow down how fast they can eat.

10/25/21: I added a Version 4 with a cleaner model than the original that was constructed using a shape generator. V4 is slightly larger in outer diameter than the original and has some designed in structure under the center bottom that can be easily removed after printing. This raises the center bottom since my dog bowls have a slightly raised center and the original didn't sit quite flat. These changes allow the insert to be cleaned more easily and fit my dog bowls better and hopefully others as well.

Enjoy!

Post-Printing

Trim raft and strings if any.

If using V4 (recommended) remove the bottom Center support structure.

How I Designed This

Tinkercad

Category: Other

Tagi