1 / 6
Fillet and Radius Gauge Set (2mm - 7mm) ( Fillet Finder)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a two-part fillet and radius gauge set designed for measuring both internal (fillet) and external (radius)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (15)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (4)Powiązane
This is a two-part fillet and radius gauge set designed for measuring both internal (fillet) and external (radius)
Features:
- Snap-Fit Assembly: The gauges conveniently snap onto two pins on a base plate for organized storage and easy access.
- The snap-fit design allows for easy removal and replacement of the gauges.
Compact Storage: The two-part design allows for a compact storage solution.
Print Settings:
- Material: PLA
- Layer Height: 0.2mm
- Infill: 15-20%
- Supports: No
- Nozzle: 0.4mm
- Print Time: 1h
Assembly:
- Print the base plate (bottom part), the top plate, the large pin, the small pin, and the desired radius gauges.
- Insert the large pin into the hole of the bottom part of the base plate. The large pin should reach up to the lower surface of the top plate when it is placed on top.
- Push the radius gauges onto the large pin.
- Place the top plate onto the large pin, aligning the hole with the pin.
- Secure the top plate by inserting the small pin into the hole of the top plate. The small pin should fit snugly to prevent the top plate from coming loose.
To remove a Gauge pull the desired gauge off the large pin.
Feedback is highly appreciated! If you have any questions or suggestions, please leave a comment. I'm always looking for ways to improve my designs.
Happy printing!