1 / 1
Traxxas Stampede 2wd snowplow with bumper mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a snowplow with mount for the 1/10 scale Traxxis stampede.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 673
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 5)Remiksy (0)Kolekcje (27)Powiązane
I printed this out of PETG the proto type was done out of PLA but cracked easily. All infill was done with 40% gyroid. I used 3 supports with long screws that run the full length. When using these on the plow it self you will have to gently flex parts to get all holes to line up. Do not force the long screws thought. I threaded them in slowly the entire way.
