OpMenlu stripfeeder for the LumenPnP

It is the Menlu stripfeeder of @ERIK3DP_1763971 but remixed into the Opulo formfactor so for OpMenlu.. 

These feeders push the strip upwards clamping them down so components don't jump out.
Compared to other strip feeders these are the bee's knee's as i could even remove the clear tape from pesky smd LED's that normally like to jump out of the strips like flea's.

It has the same height as Opulo and most of the hole locations are retained. For now there is a 1 and 3 strip version. Only in 8mm, i am still working on the 12mm.
The whole feeder is still a work in progress although many have them in use already.

You have to screw them in first! And then add the slider with the rubber band and hook it up from the top. (See pictures 4.5.6.7 and the video)

To make:

• There are 2 versions of the slider the second one is from @rallekralle_9595 and has more angled hooks that should work better with the rubber bands.
   
• Use a good filament that has minimal warping the sliders and feeders need to be printed really flat. 
• I also had to sand the side of all the sliders, so there is room to take off 0,1mm or so... 
• I used these rubber bands for assembly: https://nl.aliexpress.com/item/1005004659263003.html  
  @rock suggested these: https://www.amazon.com/dp/B0D3PTM4PW
• Used a M2,5x12 bolt for the front
• Used a M3x10 to 16 for the back (not necessary) 
• Printed them at 0.12mm layer height with the variable height option on in Orcaslicer. 

Check out the original for additional information here:
https://www.printables.com/model/885928-menlu-strip-feeder-8mm12mm-for-lumenpnp

Let me know how it works out for you.

Tips or suggestions? Join the discord: https://discord.com/channels/688723670461448225/1104598690443837530/1311969889468289075

A helpful video from @rallekralle_9595 shows how they can be assembled:

Update 23-4-2025
I know that some people have made their own versions and these could use some improvement, I will in future remake these and add all the little improvements that people have made. 

User @jbussmann remixed this into his own version it has all sorts of little tweaks that suited his specific needs.
You can find them here:  https://github.com/jbussmann/PnP-mods/tree/draft/passiveFeeder/LumenPnP/Passive%20Strip%20Feeder