F450 DIY Mapping Drone Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pixhawk, H12 TRX, M8 GPS, Battery, & Naked Action Cam Mounts for F450 DIY Quadcopter frame. Incl opt covers and sides.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I am in the process of building a mapping drone using this F450 frame kit from AliExpress:
https://www.aliexpress.us/item/3256804619720467.html
And have incorporated the Skydroid H12 Radio/Video system:
https://www.aliexpress.us/item/3256804297856288.html
Battery mounts are sized for Hoovo 3S 5200 MAh Batteries, 152*44.5*26mm:
I had an old Gopro Hero 3+ Silver and a generic HDCam from amazon laying around so I stripped those down, hacked in a transistor to control the photo button from the Pixhawk, and made some new mounts for them.
Parts were printed in a combination of PLA and PETG (whichever happens to be loaded in the printer when I need the part) and all 4mm holes are meant to have 3mm heat press inserts used.
I can send the drone on a mapping mission, and it will take two photos at once (two cameras) for each trigger.
This is a work in progress and will be updated regularly.