1 / 5
SodaStream Flaschen Boden, Soda Stream Flasche, Bottle — zdjęcie 1
1 / 5

SodaStream Flaschen Boden, Soda Stream Flasche, Bottle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Das Unterteil für die älteren SodaStream Flaschen.

Ocena
0 / 5
Polubienia
3
Pobrania
21
Wydruki
0
Wyświetlenia
125
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Das Unterteil für die älteren SodaStream Flaschen.
Gedruckt habe ich es mit ABS wegen Geschirrspüler sollte es Minimum mit PETG gedruckt werden.
Unter die Verrieglung muss ein wenig Stützstruktur ich hatte Baum gewählt, die Stützstruktur muss vorsichtig dann entfernt werden das die Verriegelung nicht abbricht.
Ich habe es mit variabler Schichthöhe gedruckt das die Rundung schön wird somit im unteren Bereich mit 0.08 später dann mit 0.2.

The bottom part for the older SodaStream bottles.
I printed it with ABS because of dishwasher it should be printed minimum with PETG.
Under the latch a little support structure is needed, I had chosen tree supports, the support structure has to be removed carefully so that the latch does not break off.
I printed it with variable layer height so that the rounding is nice, so in the lower area with 0.08 then later with 0.2

Tagi