Yakima Ski Rack Mount for Rivian Crossbars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Works with old school Yakima ski rack and Rivian OEM cross bars
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I modified this Yakima adaptor to work with the bulky Rivian OEM cross bars by assembling it with the mount created by Tinker86 on Thinkgiverse (https://www.thingiverse.com/thing:6533914).
It is designed to be used with standard insects T slot bolts, such as these https://a.co/d/a5l2Ux0. I purchased the “M6x35mm” and they work well.
In the 3mf file I used OrcaSlicer to create a negative space with a cylinder to allow for a seat for the small washer and locking washer in the bolt kit linked above. (Note: This is not in the STL file)
Print Settings:
- Infill 25% Triangles (for strength)
- PETG
- Supports needed
- Nozzle: .4mm
- .20mm layer height
- Printed on side